5 Tips on Selecting the Right Crane for Your Lift
There comes a time in every maintenance manager's life when it's necessary to lease a crane to install equipment. Lifting heavy equipment is something that should never be taken lightly and should always be performed by a qualified rigger.
The selection of the right crane is a crucial element as there are many different forms of cranes available, each designed for a specific task. These include:
- Hydraulic boom cranes
- All terrain cranes
- Rough terrain cranes
- Crawler cranes
- Boom trucks
Here are five tips for selecting the right Phoenix crane leasing company for your lift.
When you need to lift and move equipment, the lifting capacity of the crane is a combination of the weight of the load and the required reach of the crane. When the load has to be swung out further than the crane, you need a much larger crane than when the crane can be positioned right next to the load.
The first aspect to consider are the ground conditions on the access route to where the lift will take place, because you don't want a bogged down heavy lift crane. It's essential to carefully establish the maximum axle load the terrain can support and choose a crane that's suitable. You also need to ensure that the ground conditions at the lift site are stable so the support legs of the crane cannot shift under load. Rough terrain cranes and crawler cranes are the best choice for soft and rough terrain.
A common mistake made during plant design is not allowing adequate access to plant areas so that equipment can be moved before, during, and after installation. Where access is difficult, boom trucks and rough terrain cranes can be used, provided the roof is not too low and there is a wide access route. However, these cranes have a limited reach and lifting capacity. Alternatively, it may be possible to remove a section of the roof and use a large hydraulic boom crane or all terrain crane from outside the building. The main limitation of this solution is that actual lifting capacity is restricted if the load is some distance from the crane.
The most difficult and dangerous lifts are when the load has to be lifted high in the air. These lifts should only be carried out by companies with specialized lifting equipment and skills. These lifts require careful planning, set up times are long, and special permission may be required from local authorities. All terrain cranes are the best choice for high lifts.
Phoenix Crane Leasing
The use of mobile cranes for lifting equipment always carries an element of danger. Every lift has to be carefully planned and every possible contingency considered. Personal safety must always be a primary consideration as well as the potential risk to plant and equipment from a failed lift.
Because of the risks associated, the rigging company selected should be one that does not cut corners and has a documented safety process. It's also essential to ensure that the crane leasing company is properly insured. These are several reasons why Southwest Industrial Rigging, a Phoenix crane leasing company, should be your first choice for crane leasing.