Common Rigging Equipment Mistakes to Avoid
Rigging equipment is important to understand so you don't fall into the trap that many novice operators have when they rent or lease this machinery. A serious approach must be taken in planning and safety. Working with a heavy lifting expert can help ensure that you make appropriate decisions for your project. Here are common mistakes when it comes to cranes and other maintenance gear.
1. Not Having Any Training
You should not operate rigging equipment until you have had proper training. There are training schools for operating and understanding rigging equipment in major cities across the country, as well as online. It is absolutely imperative for the safety of others and yourself to be aware of the machine's capabilities and limitations. It can be very dangerous and sometimes costly to operate this equipment without the proper knowledge and skills.
2. Avoiding Manufacturer's Instructions
If you are going to use rigging equipment either for an employer or as a customer, you must follow the machine's manufacturer's manual and the owner's instructions. You must operate the vehicle and extensions as instructed in order to protect people and the rigging equipment.
3. Lack of Knowledge About Safety Standards
One of the reasons OSHA started enforcing strict safety policies in the crane industry was because too many cRANES tipped over, causing injury or death. Part of the problem was they didn't know how to read load charts, which determine maximum loads so the weight doesn't disrupt the machine's center of gravity. Having an understanding of measurements, height, weight, angles and balance can help you visualize safe operation better.
4. Selecting the Wrong Slings and Hardware
Another major error that inexperienced rigging operators can make is not understanding the right gear for material handling. Consequently, if you use equipment that is inappropriate for the job it can prolong the time and cost of your project. You must avoid selecting slings and hardware that are not suitable for the loads you are attempting by researching rigging equipment yourself or consulting with a rigging expert.
5. Attempting to Lift Loads Too Heavy for the Crane
Every crane has a maximum load capacity identified in the manufacturer's instruction manual. The machine has a Capacity Tag Identification, as load weight must not exceed the amount shown on the decal, otherwise it can damage the crane and the operator can get injured. Make sure you study these numbers before you arrive at the work site. You should compare the load weight with the machine's capacity before deciding on the equipment to use.
6. Neglecting Proper Care of Equipment
You must store the equipment as specified by the manufacturer or the owner, otherwise it can diminish performance. For example, the sling must be cleaned and lubricated so it is free of dirt and debris. Otherwise the sling can degrade from rust and corrosion. Durability and performance of the sling depends on using the appropriate lubricant.
7. Failing To Do a Thorough Equipment Inspection
All rigging equipment must be inspected for safety and damage before you do a job. If something doesn't work it needs a red tag to indicate it is out of commission and you should notify the owner. Inspection includes looking at every stage of the rigging process and evaluating what type of equipment is needed. You absolutely must inspect the job site before starting the work.
When it comes to experts in rigging, be sure to hire a professional rigging company. Contact Southwest Rigging.